
What's in this market read
- What a construction loan actually is
- Construction-to-permanent (single-close) versus construction-only (two-close)
- How the loan amount is set: land, build cost, and the future value
- The draw schedule: how money is released during the build
- Interest-only payments during construction
- The down payment: why construction loans ask for more
- Qualifying for a construction loan
- The builder and contractor requirements
- Builder’s risk insurance during construction
- The land: buying it with the loan or already owning it
- Rate risk during a long build, and how a rate lock interacts with it
- Converting to the permanent loan
- FHA and VA construction loan options, briefly
- What happens if construction costs run over budget
- What happens if the builder does not finish
- Construction loan versus buying new construction from a builder
- Construction loan versus an FHA 203(k) renovation loan
- Where the total construction budget goes
- A worked example: building one home from loan to keys
- Common construction loan mistakes
- A construction loan checklist
- The bottom line
Short answer: A construction loan is short-term financing that pays a builder in stages as a home is built, with interest generally charged only on the amount drawn so far. It commonly requires a larger down payment than a mortgage on an existing home, often an illustrative 20 percent or more of the total project cost. A construction-to-permanent structure converts automatically into a standard mortgage once the home is finished; a construction-only loan has to be refinanced into one separately.
What is a construction loan, and how is financing a home that does not exist yet actually different from an ordinary mortgage? A construction loan solves a problem a standard mortgage cannot: there is no finished, appraisable house to lend against on day one, only a lot, a set of plans, and a builder’s budget. Lenders respond by funding the project in stages, tied to inspected progress, rather than handing over the full amount up front, and by charging interest only on what has actually been disbursed until the home is complete and a normal mortgage can take over.
This market read works through the mechanism end to end: the construction-to-permanent and construction-only structures and why most owner-builders choose the former, how the loan amount is actually set against land, build cost, and the home’s future value, the draw schedule that releases money as work is completed, why payments during the build differ from an ordinary mortgage payment, the larger down payment the risk commands, how lenders qualify you and your builder, what happens when costs run over or a builder does not finish, and how a construction loan compares to buying new construction from a builder or financing a renovation through an FHA 203(k) loan. The affordability calculator and the companion calculator beside this market read will reprice any numbers you are weighing against your own budget.
Key takeaways
- A construction loan funds a build in stages, called draws, tied to inspected progress, rather than disbursing the full amount at once.
- A construction-to-permanent loan closes once and converts into a standard mortgage at completion; a construction-only loan has to be refinanced separately, with a second set of closing costs.
- During construction you generally pay interest only on the amount actually drawn, a payment that starts small and rises through the build.
- Down payment requirements commonly run higher than on an existing-home mortgage, often an illustrative 20 percent or more of the total project cost.
- Cost overruns beyond the built-in contingency reserve, and a builder who does not finish, are the two risks specific to this kind of financing. Both are manageable with a careful budget and a vetted contractor.
What a construction loan actually is
A construction loan exists to bridge the gap between owning a lot and owning a finished home, financing the build itself rather than a structure that already stands. Instead of a lender appraising an existing house and lending against its current value, a construction lender underwrites a set of plans, a licensed builder’s detailed budget, and an appraisal of what the home will be worth once it is finished, then releases money in stages as the builder actually completes work, verified by inspection at each stage.
This staged release is the feature that defines the whole product. A standard mortgage trusts that the collateral already exists and simply records a lien against it. A construction loan cannot do that on day one, so it substitutes ongoing verification, an inspector confirms the foundation is poured before that draw releases, confirms framing is up before the next one does, and so on, for the trust a finished appraisal would otherwise provide. Every other feature covered in this market read, from the payment structure to the qualifying bar, follows from that one structural difference.
Construction-to-permanent (single-close) versus construction-only (two-close)
Construction financing comes in two structures, and the choice between them matters more than almost any other decision in the process. A construction-to-permanent loan, sometimes called a single-close loan, is one loan from start to finish: it funds the build through draws, and once the home is complete and a final inspection and appraisal confirm it, the same loan automatically converts into a standard long-term mortgage, with one set of closing costs paid at the very beginning.
A construction-only loan, sometimes called a two-close loan, is a separate, short-term loan that covers only the build itself and comes due in full once construction finishes. The owner then has to apply for and close on a new permanent mortgage to pay off the construction loan, which means going through underwriting twice and paying closing costs twice. For an owner building a primary residence, the construction-to-permanent structure is more common specifically because it avoids that duplicated cost and paperwork, though a construction-only structure can still make sense for a builder or investor planning to sell the finished home rather than live in it and finance it long-term themselves.
How the loan amount is set: land, build cost, and the future value
The loan amount on a construction loan is built from the total project cost, the land if it is being purchased or its value if you already own it, plus the full construction budget, and it is checked against a loan-to-cost or loan-to-value limit, commonly cited around 80 percent, applied to whichever of the total cost or the appraised future value is lower. The appraisal here is forward-looking: an appraiser reviews the plans and the builder’s budget and estimates what the finished home will be worth, which is a different and generally more conservative exercise than appraising a home that already stands.
On an illustrative $420,000 total project, land plus build cost, an 80 percent limit caps the construction loan at $336,000, which leaves $84,000, about 20 percent of the total project cost, that you have to bring as cash, equity in land you already own, or a combination of the two. This is the arithmetic behind the commonly higher down payment construction loans ask for compared with a mortgage on an existing home: the lender is pricing the added risk of an unfinished project by requiring more of your own money in the deal from the start.
The draw schedule: how money is released during the build
Money does not arrive in your account or the builder’s in one lump sum; it is released in draws, tied to defined stages of completed, inspected work. A typical draw schedule breaks the hard construction budget into stages, commonly something like site preparation and foundation, framing, mechanical systems like plumbing, electrical, and HVAC, interior finishes, and final completion, with each stage representing an agreed percentage of the total build cost and triggering its own inspection before the lender releases funds for it.
An illustrative draw schedule against a $305,000 hard construction budget
Each stage releases only after an inspection confirms the prior stage's work is actually complete.
Framing is typically the largest single draw, since it consumes the most labor and material in one stage. The exact stages and splits vary by lender and by project; this is an illustrative pattern, not a fixed rule.
Each draw request generally has to be submitted by the builder, confirmed by an inspection, and approved by the lender before funds move, which is a slower process than a contractor paid directly by a homeowner might be used to on a smaller remodeling job. Building that inspection-and-approval lag into your builder’s own payment expectations and project schedule, explicitly, before the first draw is requested, avoids a lot of mid-project friction.
Interest-only payments during construction
During the build, most construction loans charge interest only, and only on the portion of the loan that has actually been drawn and disbursed so far, not on the full approved amount sitting unused. In the early stages, when little has been drawn, this payment is small; as more of the budget is released through framing, mechanicals, and finishes, the payment rises along with the outstanding drawn balance. On the illustrative $336,000 construction loan used throughout this market read, the interest-only payment might average roughly $980 a month across the build on the portion typically drawn by the midpoint, though the actual month-to-month figure moves with exactly how much has been disbursed at any given time.
This rising, interest-only structure is one of the more commonly misunderstood parts of construction financing. An owner who budgets for a single flat number for the whole build can be caught off guard when the payment late in the project, once most of the loan has been drawn, runs noticeably higher than it did at the start. Ask your lender for a draw-by-draw payment projection rather than a single estimated figure, so the rising shape of the cost is visible before you commit to the build.
The down payment: why construction loans ask for more
Construction loans commonly require a larger down payment than a mortgage on an existing home, often an illustrative 20 percent or more of the total project cost, and the reason traces directly back to what the lender is actually lending against. An existing home has a known, appraised value the day the loan closes; a home under construction is a plan, a budget, and a builder’s track record, all of which carry more uncertainty than a finished structure sitting on its lot. Lenders offset that uncertainty by requiring more of your own money in the project, which both lowers their exposure and gives you a stronger incentive to see the project through rather than walk away if it gets difficult.
If you already own the land free and clear, its value can often count toward this equity requirement rather than requiring additional cash on top of it, which meaningfully changes the cash-to-close math for an owner building on inherited or previously purchased land. Ask a lender specifically how land equity is credited against the down payment requirement in their program, since the treatment varies.
Qualifying for a construction loan
Your own qualification runs on familiar rails: credit, income, and debt-to-income ratio, reviewed much the way our debt-to-income market read describes for any mortgage, generally with a somewhat higher credit bar than a standard purchase loan given the added project risk. What is different, and often the slower part of the approval, is that the project itself is underwritten alongside you: detailed plans, a licensed builder’s itemized budget, a construction timeline, and the forward-looking appraisal all have to support the loan amount before closing.
Reserves, cash held back beyond the down payment and closing costs, are frequently required more heavily here than on a standard purchase, since a construction project has more ways to encounter an unplanned expense than a home you are simply buying as-is. A lender who sees a thin cash position behind an ambitious build budget has real reason for caution, and shoring up your reserves before applying is one of the more effective things you can do to strengthen the file.
The builder and contractor requirements
The builder is underwritten almost as carefully as you are, because the lender is trusting that person or company to actually deliver the finished home the appraisal is based on. Lenders typically require a licensed, insured general contractor with a demonstrated track record, and they review the contractor’s bid for realism and completeness the same way an FHA 203(k) renovation loan reviews a rehab contractor’s scope of work. A smaller number of specialized lenders permit an owner-builder structure, where you act as your own general contractor, but typically under stricter experience and reserve requirements than a standard construction loan carries.
Choosing a builder with construction-loan experience specifically, not just general building experience, is worth prioritizing, since the draw-and-inspection rhythm this financing imposes is unfamiliar territory for a contractor used to being paid directly by a homeowner on a simpler timeline. Ask prospective builders directly how many lender-financed construction projects they have completed and how they structure their own payment expectations around the draw schedule.
Builder’s risk insurance during construction
An ordinary homeowners policy is written for a finished, occupied home, and it generally does not cover a structure that is only partially built, which leaves a real gap most first-time construction borrowers do not think about until a lender asks for proof of coverage. Lenders typically require a builder’s risk policy, a short-term policy specifically covering the structure, materials on site, and sometimes tools and equipment, against fire, theft, weather, and vandalism during the build itself, with coverage usually running from groundbreaking through substantial completion.
Who holds the policy, you or the builder, and exactly what it covers varies by project and by state, so confirming the specific arrangement in your construction contract matters as much as confirming the lender’s own insurance requirement. Once the home is finished and the loan converts to a permanent mortgage, the builder’s risk policy ends and an ordinary homeowners policy takes over, which is itself a condition your lender will check before finalizing the conversion. Treat lining up both policies, in the right order and with no coverage gap between them, as part of the same checklist as the loan itself rather than an afterthought handled the week of closing.
The land: buying it with the loan or already owning it
Construction loans can be structured to include the cost of acquiring the land as part of the total project financed, or to simply recognize land you already own as equity toward the project. If you are buying the lot as part of the same transaction, its purchase price becomes part of the total project cost the loan-to-cost calculation runs against, the same way the $80,000 of land cost factors into the illustrative $420,000 total used throughout this market read.
If you already own the land, whether purchased earlier, inherited, or otherwise acquired, its current appraised value typically counts toward your required equity in the project, which can meaningfully reduce the additional cash you need to bring. The land still has to be clear of any competing liens the construction lender is unwilling to subordinate to, so confirm the title situation on land you already hold before assuming its full value will count cleanly toward the loan.
Rate risk during a long build, and how a rate lock interacts with it
A home build commonly runs many months from groundbreaking to a finished certificate of occupancy, and that length of time introduces a rate risk an ordinary purchase or refinance does not carry to the same degree. On a construction-only loan, the rate you eventually get on the separate permanent mortgage is whatever the market offers when you apply for it after construction finishes, months or more than a year after you started, with no protection from the construction loan itself. On a construction-to-permanent loan, many lenders offer some form of rate lock or rate protection spanning the construction period, though the terms, how long the lock holds and whether a rate improvement during the build is passed through, vary significantly by lender and are worth asking about explicitly before you close.
Because the gap between application and a finished home is so much longer here than on a typical mortgage, confirming exactly what rate protection, if any, applies to your specific construction-to-permanent loan is one of the more consequential questions in the whole process, not a minor detail to leave for later.
Converting to the permanent loan
On a construction-to-permanent structure, the conversion to a standard mortgage happens once the home passes a final inspection, the appraisal confirms the completed value, and any remaining conditions from the original approval are satisfied. From that point, the loan behaves exactly like an ordinary mortgage: principal and interest on the full balance, not just the portion drawn, replace the interest-only construction payment, and the term, commonly 30 years, begins.
On the illustrative $336,000 loan used throughout this market read, at an illustrative 7.0 percent rate over 30 years, that permanent payment runs about $2,235 a month, a noticeable step up from the rising, but still partial, interest-only payment during the build. Confirming the conversion mechanics, whether a new appraisal or inspection could delay it, and whether any rate adjustment applies at conversion, is worth doing well before the home is actually finished rather than discovering the details at the transition.
FHA and VA construction loan options, briefly
Both the FHA and VA offer their own construction-to-permanent loan programs, generally layering the construction-specific draw and inspection process onto the same credit, income, and, for VA, service-eligibility rules covered in our FHA loan explainer and VA loan overview. The appeal of the government-backed versions is the same as on a standard purchase: a meaningfully lower down payment is sometimes available than the illustrative 20 percent commonly cited for conventional construction financing, which matters given how large that conventional requirement runs relative to buying an existing home.
Not every lender who originates FHA or VA purchase loans also offers the construction version, since it requires additional staff and processes to manage draws and inspections, so confirm specifically which lenders in your market provide the construction-to-permanent option under your eligible program before assuming it is universally available.
What happens if construction costs run over budget
Nearly every construction loan holds back a contingency reserve specifically to absorb this risk, commonly an illustrative 5 to 10 percent of the hard construction budget, available to cover modest cost overruns without requiring a new loan or an emergency cash infusion. On the illustrative $305,000 hard cost budget used throughout this market read, a 10 percent reserve is about $30,500, money set aside but not released unless an overrun actually occurs.
If costs exceed even that reserve, you are generally responsible for the difference out of pocket, since the lender underwrote the loan against the original approved budget and will not automatically expand it because costs ran high. This is exactly why a detailed, realistic budget built with a genuine contingency, rather than an optimistic one that assumes nothing goes wrong, matters more here than on almost any other kind of financing, and it is worth padding your own personal reserves beyond the loan’s built-in contingency for exactly this reason.
What happens if the builder does not finish
This is the risk unique to construction financing, and it deserves clear-eyed planning rather than being treated as a remote possibility. If a builder defaults, underperforms badly, or goes out of business mid-project, you can be left holding an unfinished home, a partially disbursed loan, and the task of hiring a replacement contractor to finish the work, frequently at a higher cost than the original bid once a new contractor has to pick up someone else’s partial work.
The protections available are the ones covered earlier in this market read: careful builder vetting before you ever sign a contract, a construction contract with clear remedies and milestones, lender-required inspections before each draw that are meant to catch underperformance early rather than late, and keeping the contingency reserve genuinely available rather than mentally spent on upgrades. None of these eliminates the risk entirely, but together they are the realistic defense against it, since no amount of paperwork fully replaces a builder who simply does not deliver.
Two additional practices are worth asking your lender and your closing attorney or title company about specifically. Lien waivers, signed statements from the builder and its subcontractors and suppliers confirming they have been paid for completed work, are commonly collected before each draw releases, since an unpaid subcontractor can otherwise file a lien against your property even after you have paid the general contractor for that same work. And a holdback, a small percentage of each draw withheld until the final inspection, gives you leverage to ensure punch-list items are actually finished rather than left undone once the bulk of the money has already changed hands. Neither practice is universal across every lender and state, so confirm which of them apply to your specific project before you assume the protection exists.
Construction loan versus buying new construction from a builder
It is worth being precise about a distinction that trips people up by name alone. A construction loan, as this market read covers it, finances you building a custom home on a lot, where you hire the builder and control the plans and budget directly. Buying a new construction home from a production builder, the subject of our market read on new construction versus an existing home, is usually financed with an ordinary purchase mortgage instead, since the builder typically completes the home, or a speculative or to-be-built unit in a planned community, using the builder’s own financing, and you simply buy the finished, or soon-to-be-finished, product the way you would buy any other house.
The two paths overlap only when you are commissioning a fully custom home from the ground up, which is the specific case a construction loan is built for. If you are instead choosing from a builder’s existing floor plans in a development, read our new construction versus existing home comparison first, since the financing, the contract structure, and the risks you are actually managing are substantially different from what this market read describes.
Construction loan versus an FHA 203(k) renovation loan
The other comparison worth being clear on is construction financing against renovation financing. A construction loan builds a new home, typically on a lot with no existing structure or with one being demolished, while an FHA 203(k) loan finances repairing or renovating a home that already stands, evaluated on an after-improved basis rather than from the ground up. Both share the draw-and-inspection mechanic this market read describes, and both require a vetted contractor, but they are different products for different starting points: one begins with a lot, the other with an existing structure that needs work.
An owner trying to decide between tearing down and rebuilding versus renovating an existing structure is really choosing between these two financing paths as much as between the two construction approaches, and the economics, cost, financeable scope, and timeline, can differ meaningfully between them even on a similar end result.
Where the total construction budget goes
Seeing the full project budget as one whole, rather than only the loan amount, clarifies what the down payment and the loan are actually covering. On the illustrative $420,000 total project used throughout this market read, land, hard construction costs, the contingency reserve, and financing fees each take a share.
Where an illustrative $420,000 construction project budget goes
Land plus hard construction costs plus a 10 percent contingency reserve plus illustrative financing fees.
Hard construction costs dominate the budget, as expected, but the contingency reserve alone is a meaningful five-figure sum, which is exactly why it exists rather than being treated as a rounding error.
A worked example: building one home from loan to keys
Walk one illustrative project through the whole sequence. The total project is $420,000: an $80,000 lot and a $305,000 hard construction budget, plus a 10 percent contingency reserve of $30,500 and illustrative financing fees of $4,500. At an 80 percent loan-to-cost limit, the construction loan caps at $336,000, which means the borrower brings $84,000, 20 percent of the total project, as cash or land equity.
During the roughly nine-month build used in this example, the borrower pays interest only on whatever has actually been drawn, starting near zero in the first weeks and rising as site work, framing, mechanicals, and finishes are each completed and inspected, averaging an illustrative $980 a month across the build on the typical drawn balance. Once a final inspection and appraisal confirm the home is complete, the loan converts to a permanent mortgage on the full $336,000 balance, and at an illustrative 7.0 percent rate over 30 years, the payment settles at about $2,235 a month going forward, the figure the companion calculator above will rerun on your own project’s numbers.
Common construction loan mistakes
The recurring errors cluster around underestimating how different this financing is from a standard mortgage.
- Budgeting with no real contingency. An optimistic budget with nothing held back for surprises is the single most common way a project runs into trouble mid-build.
- Assuming a flat payment through construction. The interest-only payment rises as more of the loan is drawn. Plan for the later months, not just the first one.
- Skipping builder vetting. The contractor’s ability to deliver is as central to this loan’s risk as your own credit. Check licensing, insurance, and a real track record.
- Underestimating the down payment. Construction loans commonly ask for more than an existing-home mortgage. Confirm the actual figure early, not after you have fallen in love with a plan.
- Not asking about rate protection. A long build carries real rate risk. Confirm what, if anything, your construction-to-permanent loan protects against it.
- Confusing this with buying new construction from a builder. Commissioning a custom home and buying a builder’s existing floor plan are financed very differently.
- Treating the contingency reserve as spending money. It exists for overruns, not upgrades, and spending it early leaves no cushion when a real surprise appears.
- Not confirming the conversion mechanics. Ask well before completion whether a new appraisal, inspection, or rate adjustment applies at the switch to a permanent loan.
A construction loan checklist
Before you commit to building with a construction loan, work through this sequence in order.
- Choose construction-to-permanent unless you have a specific reason not to. It avoids a second closing and a second set of costs for an owner planning to live in the finished home.
- Vet your builder as carefully as your lender will. Licensing, insurance, references, and specific experience with lender-financed, draw-based projects.
- Build a real contingency into the budget. An illustrative 5 to 10 percent of hard costs, genuinely set aside rather than assumed away.
- Confirm the down payment and how land equity counts. Size the actual cash you need, not an assumption carried over from buying an existing home.
- Ask about rate protection across the build. Get the specific terms in writing before you close, given how long a build can run.
- Run the numbers through the companion calculator above. Check both the rising construction-period payment and the eventual permanent payment against your real budget.
A buyer who works this list treats a construction loan as the two-phase commitment it actually is, the build and the permanent mortgage that follows it, rather than discovering the differences from an ordinary mortgage partway through.
The bottom line
A construction loan finances building a home in stages, releasing money through inspected draws rather than all at once, charging interest only on what has actually been disbursed until the home is finished. A construction-to-permanent structure then converts automatically into a standard mortgage, while a construction-only loan has to be refinanced into one separately, with a second round of closing costs. The down payment commonly runs higher than on an existing home, often an illustrative 20 percent or more of the total project cost, because the lender is financing a plan and a builder’s promise rather than an appraised, finished structure.
Vet your builder as carefully as your lender vets you, build a genuine contingency into the budget rather than an optimistic one, confirm the down payment, the rate protection, and the conversion mechanics before you close, and run the full numbers, both the rising construction-period payment and the eventual permanent one, through the companion calculator above against your real budget. Ask about lien waivers and holdback practices before the first draw moves, not after a problem appears, and keep the contingency reserve genuinely untouched until it is actually needed. Done with that discipline, a construction loan is how a custom home gets built on a known budget and a known timeline, rather than financed on hope and discovered one surprise at a time.
Treat this market read as an explanation of how construction loans are structured, not as mortgage, lending, construction, or financial advice. Every rate, percentage, fee, and dollar figure above is illustrative and rounded to show the method: actual loan-to-cost limits, down payment requirements, draw schedules, contingency requirements, and rate protection terms are set by individual lenders and loan programs, and they change over time and differ by borrower, builder, project, and location. Confirm current terms with a lender experienced in construction-to-permanent financing and a licensed, vetted contractor before committing to a build.
Frequently asked questions
What is a construction loan in simple terms?
A construction loan is short-term financing that pays a builder in stages as a home is actually built, rather than handing over the full amount at once the way a mortgage does on an existing home. Money is released in draws tied to completed and inspected phases of work, you generally pay interest only on what has been drawn so far during the build, and once construction finishes the loan either converts into an ordinary long-term mortgage or is paid off by a separate permanent loan, depending on which structure you used.
What is the difference between a construction-to-permanent loan and a construction-only loan?
A construction-to-permanent loan is one loan, closed once, that funds the build in draws and then automatically converts into a standard long-term mortgage once construction is finished, with a single set of closing costs. A construction-only loan is a separate, short-term loan that has to be paid off, generally by refinancing into a new permanent mortgage, once the home is done, which means two closings and two sets of closing costs. Construction-to-permanent financing is more common for an owner building a primary residence specifically because it avoids paying those costs twice.
How much down payment does a construction loan require?
Commonly more than a mortgage on an existing home, often an illustrative 20 percent or more of the total project cost, land plus the build budget, though the exact figure varies by lender and program. The higher requirement reflects the added risk a lender takes on financing a home that does not exist yet, where the collateral is a plan and a budget rather than a finished, appraised structure. Some government-backed construction loan programs allow a lower down payment for a qualifying borrower, which this market read covers in its own section.
How are construction loan payments different during the build?
During construction you generally pay interest only, and only on the portion of the loan that has actually been drawn and disbursed to the builder so far, not on the full approved loan amount. That interest-only payment starts small and rises as more of the budget is drawn through the build, then, once construction finishes and the loan converts to a permanent mortgage, payments switch to the standard principal-and-interest structure on the full loan balance. Budgeting for a payment that grows over the build, rather than assuming one flat number, avoids an unpleasant surprise partway through.
What happens if construction costs run over budget?
Most construction loans hold back a contingency reserve, commonly an illustrative 5 to 10 percent of the hard construction budget, specifically to absorb modest overruns without requiring a new loan or an out-of-pocket scramble. If costs run over that reserve, you are generally responsible for covering the difference in cash, since the lender will not automatically increase the loan amount beyond what the approved budget and appraisal supported. This is the single biggest reason a detailed, realistic budget with a real contingency built in matters more on a construction loan than on almost any other kind of financing.
What happens if the builder does not finish the project?
This is one of the real risks specific to construction financing, and it is why lenders vet the builder as carefully as they vet you. If a builder defaults, underperforms, or goes out of business mid-project, you can be left with an unfinished home, a partially disbursed loan, and the job of finding a new contractor to complete the work, often at a higher cost than the original bid. Builder vetting, a solid contract with clear remedies, and keeping the contingency reserve intact rather than treating it as spending money are the main protections available, alongside lender-required inspections before each draw that are meant to catch problems before too much money has gone out the door.
Can you get an FHA or VA construction loan?
Yes, both the FHA and VA offer construction-to-permanent loan options, generally following the same credit, income, and, for VA, service-eligibility rules as their standard purchase loans, layered onto the construction-specific draw and inspection process. These government-backed construction loan options can allow a lower down payment than a typical conventional construction loan, which matters given how much higher the conventional down payment requirement commonly runs. Not every lender who offers FHA or VA purchase loans also offers the construction version, so confirm which lenders in your market actually originate them.
Do you need a general contractor for a construction loan?
Most construction loan programs require a licensed, lender-approved general contractor rather than allowing an owner to act as their own builder, a practice sometimes called an owner-builder loan that a smaller number of specialized lenders permit under stricter conditions. The lender vets the contractor's licensing, insurance, and track record as part of underwriting the loan, since the contractor's ability to actually deliver the home on budget and on schedule is as central to the loan's risk as your own credit and income are.
